DanSmoke® Apollo

DanSmoke Apollo is a stylish and powerful 2100 mAh e-cigarette that gives you a great amount of steam at every hit. With its size of 19x19x140mm, this is a compact power package delivered in a modern design suitable for both new and experienced steamers.

• Product Description
• User Manual
• Product Video

• Content
  

  • 1x DanSmoke Artemis 2100 mAh battery.
  • 1x N21 Clearomiser.
  • 1x N21 Coil.
  • 1x Micro USB charger.
  • 1x User Manual.

  Product Information
  

  • Capacity: 2100 mAh.
  • Size: 19x19x133mm.
  • Full recharge time: 2.5 – 3 hours.
  • Amount of vape per drag: Extensive.
  • E-liquid capacity: 2 ml. We recommend not to fill past the “Max” indicator line.
  • Recharge input: Micro USB (charger cable included).
  • LED light: Blue.
  • Safety: Leak-free and child-proof.

  Warranty: 30 days. Read our Terms and Conditions for more information.

• DanSmoke® Apollo

  

  How to use
  

  Installation of e-liquid tank

  Place the nozzle on the top of the clearomiser cap and screw the coil into the bottom of the clearomiser cap. Pour e-liquid into the tank - we recommend that you do not fill more than the "Max" indicator line. Put the clearomiser cap on the filled tank and screw it on tightly so that it is safe. Before first use, we recommend adding a few drops of e-liquid to the top of the coil head.

  Turn the e-cigarette on and off

  Quickly press the button five times to turn on the e-cigarette. The button will light up when you press it. Quickly press five times to turn it off again. The button will flash quickly five times, both when you turn it on and off.

  Vaping
  

  Carefully turn on the clearomiser cap to open or close the narrow air gap and adjust the airflow for vaping. Press and hold the button to vape.

  Refilling

  Unscrew the clearomiser cap and remove it from the tank. Add e-liquid, but be careful not to add more liquid to the "Max" indicator line.

  

  How to charge

  Please switch off the e-cigarette before charging. Insert the charging cable into the battery and connect to a USB power source.
  
  The button will illuminate quickly five times before it glows red to indicate charging. When fully charged, it will no longer glow red.
  
  When you disconnect the charging cable, the button will light purple when the battery voltage is 3.5V or more. It will show a red light when the battery voltage is below 3.5V.
  

  Important

  • Do not store DanSmoke Apollo in high temperature locations.
  • All e-cigarette products and accessories should be kept away from children.
  • If you are sensitive to nicotine, please ask your doctor or switch to a milder or nicotine-free e-liquid.
  • Contact a physician if the e-liquid comes into contact with eyes or ulcers. Do not swallow the e-liquid. If swallowed, immediately rinse your mouth and contact a doctor in severe cases.
  • To prevent short circuits, do not store individual components loosely in the pockets, in the bag or in the liquid.
  • Avoid use in humid environments. The product is not waterproof.
  • Avoid cleaning charger accessories with damp paper or cloth.
  • Keep out of reach of children. Not recommended for pregnant or lactating women.

•